Akurat LL2120 HP3
Sur commande : Expédition sous 3 à 21 jours
Avertissement : Derniers articles en stock !
237,60 € TTC
198,00 € HT
Le produit a été ajouté avec succès.
- possibility of switching colour temperature
- very strong, wide and soft flux of light
- capability to mounting to each type of camera
- fully dimmed
- capability of feeding from any source 6-20V
- up to 16W of max power comsumption
- capability of power supplying directly from camcorder battery
- high efficiency
- low operating temperature
- high shock and humidity resistance
The LL2120hp2 on-camera light is the successor of the LL2120hp - the first on the market on-camera LED lighting with a flux of light greater then1000 lumens, and it emits about 10% more of light compare to predecessor. It is the next "slim" type fixture with significantly decreased depth of heat sink, designed based on flat, high power SMD LED diodes (Surface Mount Device) in the dual balance technology. The switching of color temperature of light has implemented by the switcher placed on the rear control panel. There is a two standard color temperature available: daylight (approx. 5600K) and tungsten (approx. 3200K). This solution makes possible illuminating in all conditions; inside and outside of premises, without any optical conversion filters, as well as the only source of light.
The LL2120hp2 fixture gives strong, very wide beam of soft light. It is excelent equipment for filming in poorly illuminated venues. The angle of beam amounts 120 degrees, thanks to it the whole area of frame is equally illuminated, even if the wide lens or the wide converter are used. As in other Akurat Lighting headlights, the LL2120hp2 makes possible a dimming with no shift in color.
The LL2120hp2 is equipped with the fastening adapter, with the central fixing screw, to mount to typical "hot shoe". Both features- small depth of housing and used type of fastening, make possible opening/closing the camera viewfinder monitor without removing of the fixture, as it is necessary in case of using other lights, mounted to camcorders with a "hot shoe" socket placed near the monitor.
The durability of headlight is guaranteed by the anodized body made with aluminum, with a laser engraved lettering. The switcher of power/balance and the dimmer are placed on the backside of the housing. Both are made in protection class IP 67, and they are produced by Japanese and European renowned manufacturers. It guarantees a very long faultless working time. Characteristics of LL2120hp2 fixture predispose it to work in difficult conditions, such as high humidity, very low temperature or high pollination. DC power socket is placed at aside, to prevent interfere the power cord with the control panel.
Supply optionsPossibility of power from any source with voltage 6-20V is the next unusual functionality. The LL2120hp2 fixture may be powered from typical D-Tap camera socket (14,4V) as well as from popular 7,4V batteries used in camcorders, from the VRLA battery (6 or 12V), from the power sockets of the cars or the boats , from AC adapters, etc. The LL2120hp2 light consumes up to 16W of power, regardless of the voltage of source. Find the proper cable or adapter in the bookmark Accessories to configure your own supply option.
- DVB-02C PLAQUE CANON XF POUR LL2120
- DVB-02E PLAQUE CANON EOS POUR LL2121
- DVB-02P PLAQUE PANA CGA POUR LL2122
- DVB-02B PLAQUE PANA VW POUR LL2123
- DVB-02U PLAQUE SONY BPU POUR LL2124
- DVF-02F PLAQUE SONY NPF POUR LL2124
- LL2120-PROTECTIVE GLASS GLACE DE PROTECTION
- LL2120-DIFF GLASS HALF GLACE DE DIFFUSION BASSE DENSITE
- LL2120-DIFF GLASS HIGH GLACE DE DIFFUSION HAUTE DENSITE
- LL2120-D-TAPE CABLE CABLE D-TAP
- LL2120-AC ADAPTOR ALIMENTATION SECTEUR